Embossing entails using specially made dies to make letters stand above the surface. This process results in three-dimensional effect that is very appealing to look at. When the process is carried out using foil embossing dies, the effect is even more appealing literally and visually. This design is used whenever there is need for highlighting important information such as designs, names and logos. Two processes; die embossing and foil embossing are always combined to achieve better results.
This process is applied in coming up with brochures, presentation folders, business cards, certificates, rack cards and greeting cards. It is possible to emboss every aspect and image of a design. To arrive at a properly embossed text or object, more detailed dies and heavy papers are needed. They bring out the most attractive pieces of work.
The main foils involved in embossing are magnesium, copper scratch and brass embossing foils. The varied types of dies are always used in different environments for varied purposes dictated by certain factors. They are keenly analyzed in the sentences below.
Magnesium foils are normally applied in stamping flat surfaces, and is designed from magnesium. This is a silvery metallic element that expands on a slight exposure to small heat. The foil is acid etched, and is very affordable compared to other dies.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The other type of die is that used on brass. These are used for embossing both single and multilevel, stamping flat foils, debossing or even a combination of all these processes. This die is made from the strongest alloy of copper. When exposed to heat, it expands the least of all the dies mentioned so far. This particular type is normally hand etched, and is three times as expensive as the magnesium one. The process of coming up with it takes more than five days.
The last type of die is the scratch off foils. They are mostly applied on coated stock and plastic. It comes in different colors and models. All these colors and designs are used in the same purpose of stamping out designs. The colors do not have any effect on the final design produced other than bringing out differently colored texts.
The various types of foils are, therefore, applied in this designing process. The elements looked for in selecting a suitable die includes how they respond to changes in the amount of heat, the time taken in their designing and the nature of materials they work with. All these factors are vital in printing three-dimensional letters. Selecting a good die is important in the prevention of wastage.
This process is applied in coming up with brochures, presentation folders, business cards, certificates, rack cards and greeting cards. It is possible to emboss every aspect and image of a design. To arrive at a properly embossed text or object, more detailed dies and heavy papers are needed. They bring out the most attractive pieces of work.
The main foils involved in embossing are magnesium, copper scratch and brass embossing foils. The varied types of dies are always used in different environments for varied purposes dictated by certain factors. They are keenly analyzed in the sentences below.
Magnesium foils are normally applied in stamping flat surfaces, and is designed from magnesium. This is a silvery metallic element that expands on a slight exposure to small heat. The foil is acid etched, and is very affordable compared to other dies.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The other type of die is that used on brass. These are used for embossing both single and multilevel, stamping flat foils, debossing or even a combination of all these processes. This die is made from the strongest alloy of copper. When exposed to heat, it expands the least of all the dies mentioned so far. This particular type is normally hand etched, and is three times as expensive as the magnesium one. The process of coming up with it takes more than five days.
The last type of die is the scratch off foils. They are mostly applied on coated stock and plastic. It comes in different colors and models. All these colors and designs are used in the same purpose of stamping out designs. The colors do not have any effect on the final design produced other than bringing out differently colored texts.
The various types of foils are, therefore, applied in this designing process. The elements looked for in selecting a suitable die includes how they respond to changes in the amount of heat, the time taken in their designing and the nature of materials they work with. All these factors are vital in printing three-dimensional letters. Selecting a good die is important in the prevention of wastage.
0 comments:
Post a Comment